3mL FOAM CHG APPLICATOR

Overview

CHG Swab Applicator is a pre-saturated, sterile, single-use device designed for preoperative skin antisepsis. It combines the powerful antimicrobial action of 2% Chlorhexidine Gluconate (CHG) with 70% Isopropyl Alcohol (IPA), offering rapid, broad-spectrum protection against a wide range of microorganisms.

Whether used in operating rooms, intensive care units, or outpatient clinics, our applicators are engineered for precision, safety, and infection prevention in critical healthcare environments worldwide.

Other Antiseptic Solution Composition (Customizable)

• 0.5% wƒv CHG ( ChIorhexidine GIuconate ) + 70% vƒv IPA (IsopropyI AIcohoI)
• 3.15% wƒv CHG ( ChIorhexidine GIuconate ) + 70% vƒv IPA (IsopropyI AIcohoI)
• 4.0% wƒv CHG ( ChIorhexidine GIuconate ) + 70% vƒv IPA (IsopropyI AIcohoI)
• Povidone Iodine USP 10% wƒv (EquivaIent to 1% TitratabIe Iodine)

Specification of Antiseptic CHG Prep Swab

Item No.	CHG Solution	Skin Covering Area	Total Swab Length	Use	Packing
CY-260-2C71	26 ml	>8.0″×8.0″	8.62″ (219mm)	Press-down	50 pcs/CTN
CY-105-2C71	10.5 ml	<8.0″×8.0″	170mm (6.69″)	Press-down	50 pcs/CTN
CY-050-2C71	5 ml	>4.0″×4.0″	/	Scerew-down	100 pcs/CTN
CY-030-2C71	3 ml	≈4.0″×4.0″	/	Scerew-down	100 pcs/CTN

NOTE: The red solution makes it easy to distinguish the disinfected area, and all models can be configured with a colored disinfectant solution.

Features of Chlorhexidine Gluconate Skin Prep

Rapid-acting: Chlorhexidine holds better immediate antimicrobial activity.

Persistent: CHG Applicators keep antimicrobial activity for at least 48 hours.

Broad-spectrum: MRSA, VRE, CRE, Clostridium Difficile, and Acinetobacter.

Aseptic technique: The Applicators reduce the risk of direct hand-to-patient contact.

Active in protein-rich biomaterials: Remains active in the presence of blood and serum.

Friction scrub: Applicators promote gentle friction scrub to make CHG solution penetrate the first five layers of the stratum corneum where 80% of skin-dwelling microorganisms reside.

Instructions for Using CHG Swab

Peel the pouch to remove the handle, simply pull the ring collar to activate and release antiseptic solution, apply the foam tip on the insertion site.

Step 1

Pull and remove the ring collar lock from the handle, do not touch the foam pad.

Step 2

Press down to activate and release the antiseptic solution to the foam pad.

Step 3

Wet the treatment area with antiseptic, using gentle back-and-forth strokes.

Applications of Antiseptic CHG Swab

• Pre-injection & Preoperative Procedure.
• Peripheral lV insertions and restarts.
• Dialysis procedures Routine venipunctures.
• Percutaneous device insertions Simple biopsies.
• Vascular Access Insertion & Maintenance.
• Routine catheter maintenance Arterial blood gas collections.
• surgical site cleansing after suturing.
• Arterial venous fistulas (AVF)/arterial-venous graphs (AVG).