Test principle of the Feline Herpesvirus Antigen Test Kit

This product uses rapid immunochromatography technology to detect feline herpes virus antigen in feline eye and nasal secretions. When the diluted sample was dropped into the sample well, if there was FHV antigen in the sample, it would specifically bind to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by the FHV antibody coated on the membrane, showing a Burgundy line on the detection line (T). If the FHV antigen is not present in the sample, no visible lines are formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Components of the FHV-Ag Test Kit

Component	CY-FHVAG-01 (1 test)	CY-FHVAG-10 (10 tests)	CY-FHVAG-25 (25 tests)
Test device in foil bag (including test card,pipette &desiccant)	1 pc	10 pcs	25 pcs
Extraction vial/cap (contains extraction buffer solution)	1 vial and cap	10 vials and caps	25 vials and caps
Sampling swab	1 pc	10 pcs	25 pcs
IFU	1 pc	1 pc	1 pc

Storage conditions and Validity Period:

Store at 2-30°C and be valid for 24 months.

Sample Requirements of Feline Herpesvirus Antigen Test Kit

• Please refer to the instructions for use
• This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
• Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
• If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: Only the C line appears as a red color.
Positive: Both T and C lines appear purplish red.
Invalid: No color appears in the C line.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Test principle of the Feline Leukemia Virus Antigen Test Kit

This product uses a rapid immunochromatographic technique to detect feline leukemia virus antigen in feline whole blood or serum. If FeLV antigen was present in the sample, it would bind specifically to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by the FeLV antibody on the membrane, showing a wine red line on the detection line (T). If FeLV antigen is not present in the sample, no visible lines are formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Components of the FeLV-Ag Test Kit

Component	CY-FIVAB-01 (1 test)	CY-FIVAB-10 (10 tests)	CY-FIVAB-25 (25 tests)
Test device in foil bag (including test card,pipette &desiccant)	1 pc	10 pcs	25 pcs
Extraction vial/cap (contains extraction buffer solution)	1 vial and cap	10 vials and caps	25 vials and caps
Sampling swab	1 pc	10 pcs	25 pcs
IFU	1 pc	1 pc	1 pc

Storage conditions and Validity Period:

Store at 2-30°C and be valid for 24 months.

Sample Requirements of Feline Leukemia Virus Antigen Test Kit

• Please refer to the instructions for use
• This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
• Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
• If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: Only the C line appears as a red color.
Positive: Both T and C lines appear purplish red.
Invalid: No color appears in the C line.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Test principle of the Feline Coronavirus Antibody Test Kit

The Feline Coronavirus Antibody Test Kit detects antibodies to feline coronavirus using rapid immunochromatography. After whole cat blood, serum, or plasma is added to the sampling hole of the test tape, the sample is moved along the tomographic membrane with the colloidal gold labeled FCoV antigen. If the FCoV antibody is present in the sample, the detection line (T) will show red. No color will appear if the FCoV antibody is not present in the sample..

The Feline Coronavirus Antibody Test Kit is able to detect Feline Coronavirus antibody concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis, for professional use only.

Intend Use

For rapid screening of feline coronavirus in feline whole blood, serum, or plasma. (FCoV).

Components of the FCoV-Ab Test Kit

Item NO.	Test Cassette	Assay Buffer	Finger-stick Device	Quantitative Pipette	Instruction
CY-G003-1 (1 test)	1 pc	1 pc	1 pc	1 pc	1 pc
CY-G003-10 (10 tests)	10 pcs	10 pcs	10 pcs	10 pcs	1 pc
CY-G003-25 (25 tests)	25 pcs	25 pcs	25 pcs	25 pcs	1 pc

Storage conditions and Validity Period:

Store at 2-30°C, valid for 24 months.

Sample Requirements

• The feline Coronavirus Antibody Test Kit is only suitable for testing whole cat blood, serum, or plasma samples.
• The sample should be tested within 1 hour after collection.
• If timely testing is not possible and samples need to be properly stored, whole blood, serum, or plasma samples can be stored at 2-8℃ for 3 days, and serum or plasma samples can be stored at -20℃ for 1 month.

How to Use Feline Coronavirus Antibody Test Kit?

1. Add the collected cat whole blood, serum, or plasma samples to the assay buffer, tighten the lid, and mix upside down.
2. Aspirate 3 drops (~80 μl) of diluted sample from the quantitative pipette into the spiked wells of the assay tape.
3. Wait for 10-15 min at room temperature to read the test results. After 20 min, the test results are invalid.

Interpretation of Results

Negative: Only the C line appears as a red color.
Positive: Both T and C lines appear purplish red.
Invalid: No color appears in the C line.

NOTE: Invalid test results can be caused by various reasons and should be re-tested.

Product Performance

Sensitivity ≥ 95%

Specificity ≥ 97.5%

Stability: 2-30 ℃ unopened validity period of 2 years

Precautions for using the Feline Coronavirus Antibody Test Kit

• Do not use it if the product has expired or the foil bag is damaged.
• If the Feline Coronavirus Antibody Test Kit is removed from cryopreservation, it should be opened after returning to room temperature and used within 1 hour.
• Avoid contact with the sample wells and laminar strips on the test tape.

Test principle of the Heartworm Antigen Test Kit

This product uses a rapid immunochromatographic technique for the detection of heartworm antigens in whole blood or serum of canine and feline. After the diluted sample was dropped into the sample well, if there was HW antigen in the sample, it would specifically bind to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by the HW antibody coated on the membrane, showing a wine red line on the detection line (T). If the HW antigen is not present in the sample, no visible line is formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Components of the HW-Ag Test Kit

Component	CY-HWAG-01 (1 test)	CY-HWAG-10 (10 tests)	CY-HWAG-25 (25 tests)
Test device in foil bag (including test card,pipette &desiccant)	1 pc	10 pcs	25 pcs
Extraction vial/cap (contains extraction buffer solution)	1 vial and cap	10 vials and caps	25 vials and caps
Sampling swab	1 pc	10 pcs	25 pcs
IFU	1 pc	1 pc	1 pc

Storage conditions and Validity Period:

Store at 2-30°C and be valid for 24 months.

Sample Requirements of Heartworm Antigen Test Kit

• Please refer to the instructions for use
• This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
• Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
• If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appear next to “C”.
Positive: In the test window, two distinct colored lines appear next to “T” & “C” simultaneously.
Invalid: No color line visible next to “C”.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Test principle of the Feline Infectious Peritonitis Antigen Test Kit

This product uses a rapid immunochromatographic technique for the detection of feline infectious peritonitis antigens in feline feces or vomit. If there was FIP antigen in the sample, it would specifically bind to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by the FIP antibody coated on the membrane, showing a wine red line on the detection line (T). If the FIP antigen is not present in the sample, no visible line is formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Components of the FIP-Ag Test Kit

Component	CY-FIPAG-01 (1 test)	CY-FIPAG-10 (10 tests)	CY-FIPAG-25 (25 tests)
Test device in foil bag (including test card,pipette &desiccant)	1 pc	10 pcs	25 pcs
Extraction vial/cap (contains extraction buffer solution)	1 vial and caps	10 vials and caps	25 vials and caps
Sampling swab	1 pc	10 pcs	25 pcs
IFU	1 pc	1 pc	1 pc

Storage conditions and Validity Period:

Store at 2-30°C and be valid for 24 months.

Sample Requirements of Feline Infectious Peritonitis Antigen Test Kit

• Please refer to the instructions for use
• This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
• Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
• If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: Only the C line appears as a red color.
Positive: Both T and C lines appear purplish red.
Invalid: No color appears in the C line.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Test principle of the Feline Infectious Peritonitis Antibody Test Kit

This product uses a rapid immunochromatographic technique for the detection of antibodies to feline infectious peritonitis in feline whole blood or serum. If the FIP antibody was present in the sample, it would bind specifically to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by the FIP antigen coated on the membrane, showing a wine red line on the detection line (T). If the FIP antibody is not present in the sample, no visible line is formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Components of the FIP-Ab Test Kit

Component	CY-FIPAB-01 (1 test)	CY-FIPAB-10 (10 tests)	CY-FIPAB-25 (25 tests)
Test device in foil bag (including test card,pipette &desiccant)	1 pc	10 pcs	25 pcs
Extraction vial/cap (contains extraction buffer solution)	1 vial and cap	10 vials and caps	25 vials and caps
Extraction vial/cap (contains extraction buffer solution)	1 pc	10 pcs	25 pcs
IFU	1 pc	1 pc	1 pc

Storage Conditions and Validity

Store at 2-30°C and be valid for 24 months.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Sample Requirements of Feline Infectious Peritonitis Antibody Test Kit

1. Please refer to the instructions for use
2. This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
3. Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
4. If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Interpretation of Results

Negative: Only the C line appears as a red color.
Positive: Both T and C lines appear purplish red.
Invalid: No color appears in the C line.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Test principle of the Feline Panleukopenia Virus Antigen Test Kit

The Feline Panleukopenia Virus Antigen Test Kit uses a rapid immunochromatographic detection technique for the detection of feline fever virus antigen. A sample obtained from cat feces and vomit is added to the spiked wells and moved along the chromatographic membrane together with a colloidal gold-labeled anti-FPV monoclonal antibody. If the FPV antigen is present in the sample, it binds to the antibody on the detection line (T) and shows a burgundy color. If FPV antigen is not present in the sample, no color reaction is produced.

The Feline Panleukopenia Virus Antigen Test Kit is able to detect Feline Panleukopenia Virus Antigen concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only.

Intend Use

For rapid screening of Feline Panleukopenia Virus in feces and vomit of cats. (FPV).

Components of the FPV-Ag Test Kit

Item NO.	Test Cassette	Diluent	Disposable Swab	Instruction
CY-G006-1 (1 test)	1 pc	1 pc	1 pc	1 pc
CY-G006-10 (10 test)	10 pcs	10 pcs	10 pcs	1 pc
CY-G006-25 (25 tests)	25 pcs	25 pcs	25 pcs	1 pc

Storage conditions and Validity Period:

Store at 2-30°C, valid for 24 months.

Sample Requirements

• The FPV-Ag Test Kit is only suitable for testing cat feces and vomit samples.
• The test sample is collected fresh and immediately put into the dilution solution. The diluted sample should be tested as soon as possible within 1 hour.
• If the sample cannot be tested in time, the diluted sample can be stored at 2-8℃ for 24 hours and -20℃ for 1 month.

How to use Feline Panleukopenia Virus Test Kit

1. Use disposable cotton swabs to collect cat feces and vomit samples, put the samples into diluent and stir, stand still for 1min, take out the cotton swabs, tighten the lid, and mix upside down.
2. Tear open the aluminum foil bag of the test card, remove the test card and place it on a flat, clean counter top.
3. Pipette 3 drops (about 80 μl) of the diluted sample into the spiked well of the test card and wait for the test result.
4. Wait for 10-15 min at room temperature to read the test results, after 20 min the test results are invalid.
5. Note: The above reading time is at room temperature 15-30℃, if the temperature is lower than 15℃, the reading time should be extended appropriately; if the temperature is higher than 30℃, the reading time should be shortened appropriately.

Interpretation of Results

Negative: Within the detection window, only the control line (C) has a purple-red band.

Positive: Within the detection window, both the test line (T) and the control line (C) appear purple-red bands.

Invalid: In the detection window, the control line (C) does not appear purple-red band.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Product Performance

Sensitivity ≥ 95%

Specificity ≥ 97.5%

Precision: There are no more than one false negative and false positive judgment results within a batch; the color development of the test line and the control line between the three batch number test strips (cards) between batches should be uniform, and the color development between batches is not uniform. There is no more than one judgment result.

Stability: 2-30 ℃ unopened validity period of 2 years

Precautions for using the Feline Panleukopenia Virus Test Kit

1. Please read the instructions carefully before the test. The various reagents provided by this product are only for this test.
2. Products with expired or damaged aluminum foil bags cannot be used.
3. If the kit is taken out under low temperature storage, it needs to be returned to room temperature before opening, and the opened test card should be used as soon as possible to avoid moisture, and it should not exceed 1 hour.
4. Avoid touching the sample well on the test card and the chromatographic strip at the test window.
5. The waste after the test should be regarded as pollutants and properly disposed of according to relevant local regulations.

Test Principle of the Feline Herpesvirus Antibody Test Kit

This product uses a rapid immunochromatographic technique for the detection of antibodies to feline herpesvirus in whole blood or serum of felines. When the diluted sample was dropped into the sample well, if there was FHV antibody in the sample, it would specifically bind to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by the FHV antigen coated on the membrane, showing a Burgundy line on the detection line (T). In the absence of FHV antibody in the sample, no visible lines are formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Components of the FHV-Ab Test Kit

Component	CY-FHVAB-01 (1 test)	CY-FHVAB-10 (10 tests)	CY-FHVAB-25 (25 tests)
Test device in foil bag (including test card,pipette &desiccant)	1 pc	10 pcs	25 pcs
Extraction vial/cap (contains extraction buffer solution)	1 vial and cap	10 vials and caps	25 vials and caps
Extraction vial/cap (contains extraction buffer solution)	1 pc	10 pcs	25 pcs
IFU	1 pc	1 pc	1 pc

Storage Conditions and Validity

Store at 2-30°C and be valid for 24 months.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Sample Requirements of Feline Herpesvirus Antibody Test Kit

1. Please refer to the instructions for use
2. This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
3. Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
4. If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Interpretation of Results

Negative: Only the C line appears as a red color.
Positive: Both T and C lines appear purplish red.
Invalid: No color appears in the C line.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Test principle of the Giardia Antigen Test Kit

This product uses rapid immunochromatography technology to detect Giardia antigen in the feces of canine and feline. After the diluted sample was dropped into the sample well, if there was GIA antigen in the sample, it would specifically bind to the recombinant protein labeled with colloidal gold to form a complex that moved along the chromatographic membrane and was captured by GIA antibody coated on the membrane, showing a Burgundy line on the detection line (T). If the GIA antigen is not present in the sample, no visible lines are formed at the T position. No matter the result is negative or positive, the C line should be colored, otherwise the result is invalid.

Components of the Infectious GIA-Ag Test Kit

Component	CY-GIAAGG-01 (1 test)	CY-GIAAG-10 (10 tests)	CY-GIAAG-25 (25 tests)
Test device in foil bag (including test card,pipette &desiccant)	1 pc	10 pcs	25 pcs
Extraction vial/cap (contains extraction buffer solution)	1 vial and cap	10 vials and caps	25 vials and caps
Sampling swab	1 pc	10 pcs	25 pcs
IFU	1 pc	1 pc	1 pc

Storage conditions and Validity Period:

Store at 2-30°C and be valid for 24 months.

Sample Requirements of Giardia Antigen Test Kit

• Please refer to the instructions for use
• This kit is only suitable for testing feline whole blood or serum samples (hemolysis and hyperlipidemia samples cannot be used).
• Collect fresh samples and immediately put into the extraction buffer solution, which should be detected as soon as possible within 1 hour.
• If samples were not timely detected, store within 24 hours at 2-8°C and store within 1 month at -20°C.

Product Performance Indifelineors

1. Sensitivity ≥ 95%.
2. Specificity ≥ 97.5%.
3. Precision: no more than one false negative and false positive results within the batch; the test lines & control line (cards) between three lots shall be uniform, and no more than one time of color difference between lots.
4. Stability: valid for 24 month if unopened & store 2-30°C.

Interpretation of Results

Negative: In the test window, only one fuchsia-colored line appear next to “C”.
Positive: In the test window, two distinct colored lines appear next to “T” & “C” simultaneously.
Invalid: No color line visible next to “C”.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Test principle of the Feline Panleukopenia Virus Antibody Test Kit

Test principle of the Feline Panleukopenia Virus Antibody Test Kit uses a rapid immunochromatographic detection technique for the detection of antibodies to feline fever virus. A sample obtained from cat whole blood, serum or plasma is added to the spiked wells and moved along the chromatographic membrane together with colloidal gold-labeled FPV antigen. If FPV antibodies are present in the sample, they bind to the antigen on the detection line (T) and show a burgundy color. If FPV antibodies are not present in the sample, no color reaction is produced.

The Feline Panleukopenia Virus Test Kit is able to detect Feline Panleukopenia Virus antibody concentration, demonstrating quantitative results. The test serves only as an aid to the diagnosis. For professional use only.

Intend Use

For rapid screening of Feline Panleukopenia Virus in feline whole blood, serum, or plasma. (FPV).

Components of the FPV-Ab Test Kit

Item NO.	Test Cassette	Assay Buffer	Finger-stick Device	Quantitative Pipette	Instruction
CY-G005-1 (1 test)	1 pc	1 pc	1 pc	1 pc	1 pc
CY-G005-10 (10 tests)	10 pcs	10 pcs	10 pcs	10 pcs	1 pc
CY-G005-25 (25 tests)	25 pcs	25 pcs	25 pcs	25 pcs	1 pc

Storage conditions and Validity Period

Store at 2-30°C, valid for 24 months.

Sample Requirements

• The Feline Panleukopenia Virus Antibody Test Kit is only suitable for testing cat whole blood, serum or plasma samples.
• Fresh samples are collected for testing and should be tested as soon as possible within 1 hour.
• If the test cannot be performed in time, whole blood, serum or plasma samples can be stored at 2-8°C for 3 days and serum or plasma samples can be stored at -20°C for 1 month.

How to use Feline Panleukopenia Virus Antibody Test Kit

1. Collect a sample of cat whole blood, serum or plasma, add the sample to the diluent after collection, tighten the cap, and mix upside down.
2. Tear open the foil pouch of the test card, remove the test card and place it on a flat, clean benchtop.
3. Pipette 3 drops (about 80 μl) of the diluted sample into the spiked well of the test card and wait for the test results.
4. Wait for 10-15 min at room temperature to read the test results, after 20 min the test results are invalid.

Note: The above reading time is at room temperature 15-30 ℃, if the temperature is lower than 15 ℃, the reading time should be extended appropriately. If the temperature is higher than 30 ℃, should be appropriate to shorten the reading time.

Interpretation of Results

Negative: Within the detection window, only the control line (C) has a purple-red band.

Positive: Within the detection window, both the test line (T) and the control line (C) appear purple-red bands.

Invalid: In the detection window, the control line (C) does not appear purple-red band.

NOTE: Invalid test results can be caused by a variety of reasons and should be re-tested.

Product Performance

Sensitivity ≥ 95%

Specificity ≥ 97.5%

Precision: There are no more than one false negative and false positive judgment results within a batch; the color development of the test line and the control line between the three batch number test strips (cards) between batches should be uniform, and the color development between batches is not uniform. There is no more than one judgment result.

Stability: 2-30 ℃ unopened validity period of 2 years

Precautions for using the Feline Panleukopenia Virus Antibody Test Kit

• Please read the instructions carefully before the test. The various reagents provided with this product are for this test only.
• Products with expired or broken aluminum foil bags should not be used.
• If the kit is taken out under low temperature storage, it should be opened after restoring to room temperature, and the opened test card should be used as soon as possible to avoid moisture, and should not be used for more than 1 hour.
• Avoid contact with the sample filling holes on the test card and the chromatographic strips at the test window.
• The waste after the test should be considered as a contaminant and properly disposed of according to the relevant local regulations.